钒氮合金

用途

钒氮合金的粒度应为10mm-40mm,产品中小于10mm粒度不大于总量的5%。

技术要求 Technical Requirements

按国标GB/T20567-2006执行。按化学成分不同分为两个牌号。

Conduct as per the National Standard GB/T20567-2006. There are two

classes according to different chemical composition.

密度 Density

钒氮合金的表现密度不小于3.0g/cm3

Apparent density of vanadium-nitrogen alloy shall not less than 3.0g/cm3

粒度 Particle Size

钒氮合金的粒度应为10mm-40mm,产品中小于10mm粒度不大于总量的5%。

根据用户要求，经供需双方协商并在合同中注明，也可供应其他粒度要求的钒氮合金。

Particle size of vanadium-nitrogen alloy shall be 10mm- 40mm, weight of products with particle size below 10mm shall not exceed 5% of the total weight.

Vanadium-nitrogen alloy with other requirements on particle size can be supplied if users have requirements and that is indicated in the contract through negotiation by both parties.

钒氮合金

0319-8167989